Herz commotherm 30 SW, Руководство по эксплуатации

Страница: 52 / 80

7 T-CONTROL - Hydraulic compensator
52
7.10.7 Hydraulic compensator
Menu structure
Overview
    
Agg-Test
    
Pump 1
Pump 2
Term Description
Status
hydraulic
compensator
temperature
Indicates the hydraulic compensator temperature
compensator has a built in temperature sensor.
Existing temperature
Indicates the flow temperature of the upstream
buffer)
Required temperature
Indicates the required temperature of the downstream module (e.g.
heating circuit)
Pump 1
Indicates the state of pump 1 (ON/OFF)
Pump 1 is the pump in the back flow on the primary side
Pump 2
Indicates the state of pump 2 (ON/OFF)
Pump 2 is the pump in the flow on the
Settings
Switch on barrier
Setting up the switch on barrier of pump 2:
If the flow temperature of the upstream module (e.g. boiler, buffer) is
higher than the set up switch on barrier, the pump 2 will be switched
on.Otherwise pump 2 will stay switched off.
Temp. increase
Setting up the temperature increase of the required temperature
Compensates heat loss by exceeding the downstream module
temperature requirement.
Agg-Test
Pump 1*
Indicates the state of pump 1:
Pump 1 is the pump in the back flow on the primary side
If the indicator lamp lights up, pump 1 is switched on
Pump 2*
Indicates the state of pump 2:
Pump 2 is the pump
lamp lights up, pump 2 is switched on
Barrier times
Time 1
Two different time options are available:
time 1:
time 2:
08:00 – 11:00
Setting up individual hot water
when it will be not heated.
Monday preset gets assigned to remaining weekdays
Hydraulic compensator
Status
    
Hydr. compensator temperature
Existing temperature
Required temperature
Pump 1
Pump 2 Switch on barrier
Temp. increase
Barrier times
    
Time
Description
    
Indicates the hydraulic compensator temperatureThe hydraulic
compensator has a built in temperature sensor.
Indicates the flow temperature of the upstream module (e.g.: boiler,
Indicates the required temperature of the downstream module (e.g.
heating circuit)
Indicates the state of pump 1 (ON/OFF)
Pump 1 is the pump in the back flow on the primary side
Indicates the state of pump 2 (ON/OFF)
Pump 2 is the pump in the flow on the
secondary side
    
Setting up the switch on barrier of pump 2:
If the flow temperature of the upstream module (e.g. boiler, buffer) is
than the set up switch on barrier, the pump 2 will be switched
on.Otherwise pump 2 will stay switched off.
Setting up the temperature increase of the required temperature
Compensates heat loss by exceeding the downstream module
temperature requirement.
    
Indicates the state of pump 1:
Pump 1 is the pump in the back flow on the primary side
If the indicator lamp lights up, pump 1 is switched on
Indicates the state of pump 2:
Pump 2 is the pump in the flow on the secondary side If the indicator
lamp lights up, pump 2 is switched on
    
Two different time options are available:
08:00 – 10:00
15:00 – 21:00
Setting up individual hot water tank loading times of every weekday,
when it will be not heated.
Monday preset gets assigned to remaining weekdays
Settings
    
Switch on barrier
Temp. increase
Unit
The hydraulic
°C
module (e.g.: boiler,
°C
Indicates the required temperature of the downstream module (e.g.
°C
-
-
If the flow temperature of the upstream module (e.g. boiler, buffer) is
than the set up switch on barrier, the pump 2 will be switched
°C
Setting up the temperature increase of the required temperature
Compensates heat loss by exceeding the downstream module
°C
-
in the flow on the secondary side If the indicator
-
-
tank loading times of every weekday,
-
-