Herz commotherm 30 SW, Руководство по эксплуатации

Страница: 39 / 80

Term Description

No outside temperature sensor: If there is no outside
temperature sensor the buffer always runs in winter mode

If multiple outside temperature sensors are installed, the desired
one can be assigned to the chosen buffer.

Internal modules use a common outside temperature sensor.

External modules can use an own outside temperature sensor
but also a common.
Balancing outside sensor
Adjusting the balancing of the outside temperature

Shows the outside sensor not the correct
the value can be adjusted (setting range: ± 5°C)
Buffer is a cold buffer
This parameter has to be activated, if the same buffer is used for
heating and cooling in the case of an air/water
Agg-Test
Buffer loading pump
If the indicator light lights, the output for controlling of the buffer
loading pump is switched.
Fastrun open (*)
If the indicator light lights, the output for controlling of the fastrun
open is switched.
Fastrun close (*)
If the indicator light lights, the output for controlling of the fastrun
close is switched.
Barrier times
Time 1
By pressing this field, between two times can be selceted.

time 1 :08:00

time 2: 15:00
05:00 – 07:30
Setting up
when it will be not heated.
Monday preset gets assigned to remaining weekdays.
T-CONTROL - Buffer module
Description
No outside temperature sensor: If there is no outside
temperature sensor the buffer always runs in winter mode
If multiple outside temperature sensors are installed, the desired
one can be assigned to the chosen buffer.
Internal modules use a common outside temperature sensor.
External modules can use an own outside temperature sensor
but also a common.
Adjusting the balancing of the outside temperature
Shows the outside sensor not the correct outside temperature
the value can be adjusted (setting range: ± 5°C)
This parameter has to be activated, if the same buffer is used for
heating and cooling in the case of an air/water-heat pump.
      
If the indicator light lights, the output for controlling of the buffer
loading pump is switched.
If the indicator light lights, the output for controlling of the fastrun
open is switched.
indicator light lights, the output for controlling of the fastrun
close is switched.
      
By pressing this field, between two times can be selceted.
time 1 :08:00 – 10:00
time 2: 15:00 – 21:00
Setting up individual buffer tank loading times of every weekday,
when it will be not heated.
Monday preset gets assigned to remaining weekdays.
Buffer module
7
39
Unit
No outside temperature sensor: If there is no outside
temperature sensor the buffer always runs in winter mode
If multiple outside temperature sensors are installed, the desired
Internal modules use a common outside temperature sensor.
External modules can use an own outside temperature sensor
temperature
°C
This parameter has to be activated, if the same buffer is used for
heat pump.
-
If the indicator light lights, the output for controlling of the buffer
-
If the indicator light lights, the output for controlling of the fastrun
-
indicator light lights, the output for controlling of the fastrun
-
By pressing this field, between two times can be selceted.
-
individual buffer tank loading times of every weekday,
-
-