Herz commotherm 30 SW, Руководство по эксплуатации

Страница: 19 / 80

7.3 Main menu
After start up figure 7.3 will appear. In the centre of the screen important values according the heat pump,
buffer, hot water tank, heating circuit and so on are shown.
(see chapter7.7 ).
figure 7.3: Main menu
By pressing the button:
the main menu will be displayed
(see figure 7
fault messages (warnings & alarms) will be displayed.
(see figure 7
the individual modules (heat pump, hot water tank, buffer, heating circuit, solar, etc.)
will be displayed.
(see from chapter
the menu settings (network configuration, E
(see chapter
the date & time can be set up
(see chapter
the code input screen will be shown
(see chapter
In general the field is used to display the operating conditions, which is shown in
chapter 5 .
more important values will be shown on the second page
T
will appear. In the centre of the screen important values according the heat pump,
buffer, hot water tank, heating circuit and so on are shown. The shown values can be adapted individually
the main menu will be displayed
7.3 )
fault messages (warnings & alarms) will be displayed.
7.14or chapter 7.8 )
the individual modules (heat pump, hot water tank, buffer, heating circuit, solar, etc.)
will be displayed.
chapter7.9)
the menu settings (network configuration, E-Mail, screen saver) will be displayed
chapter7.11 , changing with code only!)
the date & time can be set up
chapter7.6 , changing with code only!)
the code input screen will be shown
chapter 7.5 )
In general the field is used to display the operating conditions, which is shown in
more important values will be shown on the second page
T-CONTROL
7
19
will appear. In the centre of the screen important values according the heat pump,
The shown values can be adapted individually
the individual modules (heat pump, hot water tank, buffer, heating circuit, solar, etc.)
Mail, screen saver) will be displayed
In general the field is used to display the operating conditions, which is shown in