Herz commotherm 30 SW, Руководство по эксплуатации

Страница: 18 / 80

7 T-CONTROL
18
7 T-CONTROL
The handling and menu navigation are described in this chapter.
explained in chapter 7.10 (page 27).
7.1 Starting the system
To switch on the display, the following condition must be fulfilled:
 The heat pump must be connected to the power supply
If it is fulfilled, the starting process of the display, which takes 1
figure 7.1: Starting process of the display
7.2 Operation and handling
The touch panel is a touch-sensitive screen and control unit. By touching the screen you can change
released values or move to other pages.The sc
pencil, etc.
figure 7. 2: Operation of the screen with fingers or pen
The handling and menu navigation are described in this chapter. Every single T-CONTROL parameter is
).
To switch on the display, the following condition must be fulfilled:
The heat pump must be connected to the power supply
If it is fulfilled, the starting process of the display, which takes 1-2 minutes, starts (see
: Starting process of the display
Operation and handling
sensitive screen and control unit. By touching the screen you can change
released values or move to other pages.The screen navigation and input can be done with finger, pen,
: Operation of the screen with fingers or pen
CONTROL parameter is
2 minutes, starts (see figure 7.1).
sensitive screen and control unit. By touching the screen you can change
reen navigation and input can be done with finger, pen,