background image

 

 

HERZ ETKF+

 

Page 14 

Room synchronous solution: 
 

 

 

max. 2 energy saving thermostatic heads ETKF+ 
max. 3 window  

 

 

Safety and disposal Instruction: 

The device is not a toy; do not allow children to play  with it. Do not leave packaging 
material lying around, as it can be dangerous in the hands of a child. 
 
 
Do not open the device: it does not contain any components that need to be serviced by 
the user. In the event of an error, please return the device to the service department. 
 

 

 
The device may only be operated indoors and must  be protected from the effects of 
damp and dust, as well as solar or heat radiation.  
 

Using the device for any purpose other than that described  in this brief instruction does 
not fall within the scope of intended use and shall invalidate any warranty or liability. This 
also applies to any conversion or modification work. The device is intended for private 
use only. 

 

 
Do not dispose of the device with regular domestic waste.  
Electronic equipment must be disposed of at local collection points for waste electronic 
equipment in compliance with the Waste Electrical and Electronic Equipment Directive.  
 
 

The CE sign is a free trading sign addressed exclusively to the authorities and does not 
include any warranty of any properties.  
 

 

For technical support please contact your service agency. 

 
 

 
 
 
 
 
 
 
 
 
 
All

 

specifications and statements within this document  are according to information available at the time of printing and meant for informational 

purpose only. Herz Armaturen reserves the right to modify and change products as well as its technical specifications and/or it functioning 
according to technological progress and requirements. It is understood that all images of Herz products are symbolic representations and 
therefore may visually differ from the actual product. Colours may differ due to printing technology used. In case of any further questions don’t 
hesitate to contact your closest HERZ Branch-office.

 

Содержание 8251















Отзывы: