Herz 8251, Техническое описание

Страница: 12 / 14

HERZ ETKF+
Page 12
Setting data and time:
After inserting or replacing batteries the firmware version number will be shown briefly. Accordingly,
date and time will be requested automatically. Settings can be changed with the (+) and (-) buttons
and confirmed with the Boost/ OK button.
• Set the year, month and date and confirm each setting with the Boost/ OK button.
Year: Month and day:
• Set the time and confirm your settings with the Boost/ OK button.
Hours: Minutes:
Once the time and date were entered, the wall the changes back to normal operating
mode.
Teaching-In:
In order to be able to use the wall the in your installation, you must teach it in to the other
devices first. Further information about “Teaching-In” the wall the can be found in the
detailed operating manual available online for download on www.herz.eu.
Configuration of the System:
If you use the wall the in the Room solution, you can individually change all settings of
your system (e.g. configuration of week programs) directly via the device. Further information about
changing the settings of the wall the can be found in the detailed operating manual
available online for download on www.herz.eu
Restore factory settings:
The factory settings of the wall the can be restored manually, e. g. if you want to re-install
an incorrectly operating system. Restoring the factory settings deletes all settings and information
about “Teaching-In” devices.
In the Room solution the factory settings of the wall the can be restored as
follows:
• Press the Mode/Menu button for at least 3 seconds.
• Select the “rES” menu item with the (+) and (-) buttons.
• Confirm your selection using the Boost/ OK button.
• "ACC" will be displayed. Confirm the factory reset with the Boost/ OK button.
You can still restore the factory settings as follows:
• Remove a battery and wait for 60 seconds.
• Press and hold down the reduction ((((()), Ok and the (-) button simultaneously and insert the
battery at the same time.
• When "rES" appears on the display, the reset was performed and the buttons can be released.