HERZ ETKF+
Page 9
Device Overview:
A: Mounting plate
B: Clip on frame
C: Electronic unit
(D) Automatic mode (Auto), manual modus (Manu), holiday function (
), boost-function (
),
open-window-function (
), operating lock (
)
(E) Weekday, empty battery symbol (
), radio synchronicity (
), comfort-/reduction-
temperature (
), time/date
(F) Bar chart of the programmed heating phases of the current day
(G) Confort temperature button (
): switching to comfort temperature
(H) Reduction temperature button (
): switching to comfort temperature
(I) Mode-/ Menu-button: change the operating modus and open the configuration menu; exit/ back
in the menu
(J) Boost-/ OK-button: confirm settings and activate the boost-function
(K) (-) button: reduce the set point temperature, browse in the menu
(L) (+) button: increase the set point temperature, browse in the menu
(M) set point-/ actual-temperature
Intended use:
The wall the is responsible for regulating the room temperature within the system. With the
wall the up to 8 energy saving thermostatic heads ETKF+ can be comfortably regulated in
a room. The wall the has an internal sensor that measures the temperature in the room
and cyclically transmits it to the ETKF+. Communication between the components is bidirectional.
This ensures that the information sent reaches the recipient.
The device may only be operated indoors and must be protected from the effects of damp and
dust, as well as solar or heat radiation.
Using the device for any purpose other than that described in this brief instruction does not fall
within the scope of intended use and shall invalidate any warranty or liability. This also applies to
any conversion or modification work. The device is intended for private use only.
Inserting (replacing) batteries:
As-delivered condition:
When you are starting up the device for the first time, first remove the mounting plate (A) on the
rear of the wall the.
• Hold the wall the firmly in one hand and pull of themounting plate at one corner.
A
B
C
D
E
F
G
H
M
L
K
I
J
