HERO MAESTRO EDGE 125 PROGRAMMED FI Скачать руководство пользователя страница 81

Страница: 81 / 84

Hero MotoCorp Ltd.

b) In case any defect is observed in any emission-related component,

only obligation/liability shall be to repair

Hero MotoCorp

and/or replace those part (s) which is/are considered to be the cause of non-compliance with the emission standards.

Subjected to Delhi jurisdiction only.

Scope of warranty

EMISSION WARRANTY

c) The emission warranty shall be applicable only to those vehicles, which are being regularly maintained at

Hero MotoCorp

Authorised Dealers/Service Points in accordance with the maintenance schedule provided in the owner's manual.

Any part (s) suffering wear and tear under the normal course of running shall not be covered under the emission warranty.

Therefore, all such parts should be replaced by the customer from time to time, on payment basis, as per the maintenance

schedule provided in owner's manual and dealer's advice.

Hero MotoCorp Ltd.

Warrants all its vehicles, assembled/manufactured at its various Plants and sold through its Authorised dealers, to

comply with emission standards as specified in S.No. of table in item(i) of sub rule (2) of Rule 115 of Central Motor Vehicles Rules,

1989, which stipulates that "Idle CO (Carbon monoxide) emission limit for all two wheeled petrol driven vehicles shall not exceed 3.

percent by volume and HC (Hydro Carbon) 00 ppm, subject to following terms & conditions.

Please

It is recommended to avail the services as per the recommended schedule to be eligible for the emission warranty benefits.

ensure that each paid service is availed within 90 days from the date of previous services or as per the recommended schedule,

whichever is earlier. All service details should be completely filled by the dealer, in the

given in the owner's

Service Record Sheet

manual.

I) All decisions regarding emission warranty settlement shall be taken by

and shall be final binding on

Hero MotoCorp Ltd.

all concerned.

a) The emission warranty shall be applicable in India and shall remain valid for a period of 3 years or 30000 kms, whichever

occurs earlier, from the date of vehicle purchase.

h) It is mandatory to obtain a PUC certificate from the Authorised PUC center. In case of non-compliance with the emission standards please

contact the

immediately alongwith the previous OK certificate, for the necessary rectification. The

channel partner/authorised workshop

manufacturer or the dealer is not responsible for any penalty levied on you on account of non-compliance with the emission standards.

Terms & conditions

e) If any part (s) related to emission characteristics of the vehicles is/are tampered and/or repaired by unauthorised

person/workshops etc, then the emission warranty shall stand cancelled.

d) The customer should follow the recommended parts replacement as per the maintenance schedule in order to avail the emission

warranty.

Содержание MAESTRO EDGE 125 PROGRAMMED FI





















































































Результаты поиска

Содержание MAESTRO EDGE 125 PROGRAMMED FI

Отзывы:

Похожие инструкции для MAESTRO EDGE 125 PROGRAMMED FI

Бренды по названию

Популярные бренды

HERO MAESTRO EDGE 125 PROGRAMMED FI, Руководство пользователя

Результаты поиска

Содержание MAESTRO EDGE 125 PROGRAMMED FI

Отзывы:

Похожие инструкции для MAESTRO EDGE 125 PROGRAMMED FI

Бренды по названию

Популярные бренды