58
(1) Free play: 2-6 mm
(2) Boot (3) Lock nut (4) Adjuster
(A) Decrease free play (B) Increase free play
3
A
B
4
2
THROTTLE OPERATION
Cable Inspection
from the fully open to the fully closed position.
Check at full left and full right steering
positions. Inspect the condition of the throttle
cable from the throttle grip down to the
throttle body. If the cable is kinked, chafed or
improperly routed, it should be replaced or
rerouted. Standard throttle grip free play (1)
is approximately 2-6 mm of grip rotation.
Check for smooth rotation of the throttle grip
If the specified free play is not achieved, adjust
the free play on throttle body side.
Remove the center compartment
(page 29)
.
Loosen the lock nut (5). Turn the adjusting
nut (6) to obtain the specified free play.
Tighten the lock nut and check the adjustment.
B
A
6
5
(5) Lock nut (6) Adjusting nut
(A) Decrease free play (B) Increase free play
Slide the boot (2), loosen the lock nut (3) and
turn the adjuster (4).
Free play adjustment
1