GB
- 16 -
8. Cleaning, maintenance and
ordering of spare parts
Danger!
Always pull out the mains power plug before star-
ting any cleaning work.
8.1 Cleaning
•
Keep all safety devices, air vents and the
motor housing free of dirt and dust as far as
possible.
•
We recommend that you clean the appliance
immediately after you use it.
8.2 Cleaning the appliance head (Fig. 1/5)
Clean the appliance regularly with a damp cloth
and some soft soap. Do not use cleaning agents
or solvents; these may be aggressive to the plas-
tic parts in the appliance.
8.3 Cleaning the container (Fig. 1/10)
The container can be cleaned with a damp cloth
and some soft soap or under running water, de-
pending on the amount of dirt.
8.4 Cleaning the
fi
lters
Cleaning the pleated
fi
lter (Fig. 3/24)
Clean the pleated
fi
lter (24) regularly by carefully
patting it and cleaning it with a
fi
ne brush or hand
brush.
Cleaning the foam
fi
lter (Fig. 3/25)
Clean the foam
fi
lter (25) with a little soft soap un-
der running water and allow it to air-dry.
Cleaning the
fi
lter (Figs. 10-11/1)
The
fi
lter (1) should be checked at regular inter-
vals and cleaned if necessary.
1. Remove
the
fi
lter cover (16) (Fig. 10)
2. Take out the
fi
lter (1) (Fig. 11)
3. Clean
the
fi
lter by tapping it or blowing it out
4. Assemble in reverse order
8.5 Maintenance
There are no parts inside the equipment which
require additional maintenance.
8.6 Ordering spare parts and accessories
Please provide the following information when
ordering spare parts:
•
Type of unit
•
Article number of the unit
•
ID number of the unit
•
Spare part number of the required spare part
For our latest prices and information please go to
www.isc-gmbh.info
9. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council o
ffi
ces.
10. Storage
Store the equipment and accessories in a dark
and dry place at above freezing temperature. The
ideal storage temperature is between 5 and 30
°C. Store the electric tool in its original packaging.
Anl_H_NT_20_SPK7.indb 16
Anl_H_NT_20_SPK7.indb 16
19.02.2018 15:30:19
19.02.2018 15:30:19