Heritage Bathrooms Lymington TLYCG00, Руководство по установке

Страница: 8 / 20

Installation-
Basin & Bath Taps
08
1. Identify all components are present prior to starting installation.
2. Position the ‘O’ ring (10) in the groove on the underside of the tap body and install the taps to the
basin/bath.
3. Using the washer (11) and metal backnuts (12), secure the taps to the basin by tightening the
backnuts onto the pre-fitted threaded tails. A suitable spanner may be required to fully tighten the
backnuts (12).
4. Connect the hot and cold water supplies to the taps.
5. Turn on the water supplies and open both taps letting the water flow for a few minutes to check all
joints and connections for any leaks.
1. Grub Screw Cap x2
2. Grub Screw x2
3. Handle x2
4. Shroud x2
5. O- Ring x2
6. Spline Adaptor x2
7. Ceramic Disc Valve x2
8. Tap Body x1
9. Anti- Splash x2
10. ‘O’-ring x2
11. Rubber Washer x2
12. Metal Backnut x2
2
3
7
1
4
5
6
8
9
11
12
10