Heritage Bathrooms Lymington TLYCG00, Руководство по установке

Страница: 10 / 20

Installation-
Bath Filler
10
1. Identify all components are present prior to starting installation.
2. Position ‘O’ rings (10) in the groove on the underside of the mixer body and install the mixer
body (8) to the bath.
3. Using the washers (11) and the backnuts (12) secure the mixer body (8) to the bath by tight-
ening the backnuts (12) onto the pre-fitted threaded tails. A suitable spanner maybe needed to
fully tighten the backnuts (12).
4. Connect the hot and cold water supplies using ¾” tap connectors (not supplied).
5. Turn the handles in both directions, letting the water flow for a few minutes to check all joints
and connections for leaks.
1. Grub Screw Cap x2
2. Grub Screw x2
3. Handle x2
4. Shroud x2
5. O-Ring x2
6. Spline Adaptor x2
7. CD Valves x2
8. Mixer Body x1
9. Anti- Splash x1
10. ‘O’ Ring x2
11. Rubber Washer x2
12. Metal Baknut x2
1
2
4
5
6
7
8
9
11
12
10
3