Heritage Bathrooms Lymington TLYCG00, Руководство по установке

Страница: 12 / 20

General Cleaning
Your fitting has a high quality finish and should be treated with care to preserve the visible surfaces.
All finishes will wear if not cleaned correctly. The only safe way to clean your product is to wipe with
a soft damp cloth. Stains can be removed using washing up liquid. All bathroom cleaning products
(powders and liquids) will damage the surface of your fitting, even the non-scratch cleaners.
Note : Never use abrasive detergents or disinfectants or those containing alcohol, hydrochloric acid
or phosphoric acid.
Cleaning the Showerhead –Bath Shower Mixer
Your Heritage showerhead has rub-clean nozzles for easy cleaning. Simply rub your fingers across
the rubber spray jets regularly and before you turn the shower on to remove any scale or debris.
The hardness of the water in your area will determine how often you should clean your
showerhead. Build up of scale in particularly hard water areas combined with constant use eans you
may need to clean your showerhead once a week. To ensure continued performance the showerhead
needs to be regularly descaled.
Maintenance
12
Shroud
Valve
Tap Body
Handle
Cap
Grub Screw
O-Ring
Spline Adapter
Anti Splash
Rubber Washer
Metal Backnut
Cleaning the Valves:
If your fitting begins to leak the following should be carried out;
Isolate both hot and cold water supplies to the tap by either:
• Turning the water supply off at the mains stopcock
• Turning off the isolation valves to the tap.
1. Remove the cap at the rear of the handle to reveal the
concealed grub screw.
2. Unscrew the grub screw and pull the handle upwards from the
shroud.
3. Unscrew the shroud and using a suitable spanner remove the
valve from the tap body.
4. Clean the valve and the seating inside the tap body.
5. If necessary replace the valve using parts supplied by Heritage
only.
6. Replace the valve into the tap body and tighten fully using a
suitable spanner.
7. Replace handle assembly.
8. Turn on water supply and check for leaks.
9. Contact our helpline should if problem persists.