herdstar BinTrac DBTB-200, Руководство по установке

Страница: 19 / 19

Installation Manual
Version 1.1
19
Part Number MAN-000014
General Inspection and Notes
☐ ☐
BinTrac Indicator is weighing correctly when applying a known load to each bin leg.
☐ ☐
Electrical Conduit
– Proper routing with flexible connections so that no binding or load is being
applied to the bin.
☐ ☐
Feedline(s) properly supported & not binding or applying additional load to the bin.
☐ ☐
Relay kit with on/off/auto switch is properly installed and functioning.
☐ ☐
Ensure retention clips are placed over bolts on top of each A Frame (see Page 8, Figure 7 )
NOTES_______________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
**WARNING**
If “No” is checked for any of these items, please consult your dealer as it may affect the performance and warranty on
this system.
Site Name and Location ______________________________________________________________
Inspected by _______________________________________________________________________
Date _____/_____/_____
Please fill out and return a copy to:
BinTrac by HerdStar
1400 Madison Ave Suite 504
Mankato, MN 56001
Phone - 507-344-8805
Fax
– 507-344-8009
Email
– service@herdstar.com
Website - www.bintrac.com
Yes No