Installation Manual
Version 1.1
11
Part Number MAN-000014
Wiring a BinTrac Indicator as a Remote Display
A Remote Display is a BinTrac Indicator (BT200 / BT260) programmed as a Remote Display which displays the same
weight data as the local BinTrac Dual Breeder Control. The Remote Display receives all of its settings (except for
enabled bins) from the BinTrac Dual Breeder Control. Calibration and Zero must be done on the BinTrac Dual
Breeder Control.
1.
Connect the wiring between the Remote Display and the BinTrac Dual Breeder Control. Power can be
supplied directly to the Remote Display or from the BinTrac Dual Breeder Control.
BinTrac Dual Breeder
Control Indicator
DBTB200
ADDITIONAL
REMOTE BINTRAC
BinTrac Indicator
(BT200) programmed
as Remote Display
PWR OUT +12V
COMM +12V
COM IN (+)
COMM +SIG
COM IN (-)
COMM
–SIG
PWR OUT -12V
COMM -12V
BinTrac Dual Breeder
Control Indicator
DBTB200
ADDITIONAL
REMOTE BINTRAC
BinTrac Indicator
(BT260) programmed
as Remote Display
PWR OUT +12V
12V IN+
COM IN (+)
+COM OUT
COM IN (-)
-COM OUT
PWR OUT -12V
12V IN-
Figure 11: DBTB200 ADDITIONAL BINTRAC REMOTE port
to COMM port on BT200 Remote Indicator
Figure 12: DBTB200 ADDITIONAL BINTRAC REMOTE port
to 12V IN and COM OUT port on BT260 Remote Indicator
