Henny Penny Evolution Elite EEG-16 Series, Техническое руководство

Страница: 14 / 98

T
roubleshooting
2
Problem Cause Correction
Improper filtering. Refer to filtering procedures.
Improper rinsing after
cleaning the vat. Clean and rinse vat and then dry thoroughly.
Oil will not
drain from
vat. Drain valve clogged
with crumbs. Open valve, force cleaning brush through drain.
Drain trough clogged. Remove right side panel and remove plug from end
of trough, clean trough.
Filter motor
runs but
pumps oil
slowly. Filter line connections
loose. Tighten all filter line connections.
Filter paper or pad
clogged. Change filter paper or pad.
Filter not reassembled
properly. Refer to assembly instructions on inside door.
Bubbles in
oil during
entire filter-
ing
process. Filter pan not com-
pletely engaged. Make sure filter pan return line is pushed completely
into the receiver on the fryer.
Filter pan clogged. Clean pan and change paper or pad.
Damaged O-ring on fil-
ter line receiver on
fryer. Replace O-ring.
Filter motor
will not run. Thermal reset button
on the rear of the
pump motor is tripped. Allow motor to cool, then, using a screwdriver, press
hard against the button until it clicks.
• T To o p prre evve en ntt b bu urrn nss cca au usse ed d b byy ssp plla assh hiin ng g
ssh ho orrtte en niin ng g,, ttu urrn n tth he e u un niitt’’ss p po ow we err ssw wiittcch h tto o tth he e
O OF FF F p po ossiittiio on n b be effo orre e rre esse ettttiin ng g tth he e ffiilltte err p pu um mp p
m mo otto orr’’ss m ma an nu ua all rre esse ett p prro otte eccttiio on n d de evviicce e..