7
EN
Replacement of silica gel ring & air-proof ring
• When the silica gel ring[4] or air-proof ring[5] was
broken. Please follow below procedures to re-
place. They shall be replaced every sixth months
if the product is operating for 12h per day.
A
A
BB
CC
D
D
1) Screw out chocolate pool[14] from the base
unit[6].
2) Take out and discard the used silica gel ring [4]
and air-proof ring[5] from the motor axle[12]
(see Picture A).
3) Take out the new air-proof ring[5] and add lu-
brication oil(high temperature resistance) into
the concave area(see Picture B).
4) Insert the new air-proof ring[5](lubrication oil
face down) back to the motor axle[12](Make
sure it is fully inserted)(see Picture C).
5) Clean the remaining lubrication oil with a damp
cloth and detergent.
6) Insert the new silica gel ring[4] back to the
motor axle[12] and fix it firmly(see Picture D).
7) Screw in chocolate pool[14] back to the base
unit[6]
NOTE: DON’T SCRATCH THE MOTOR AXLE[11]
WHEN TAKE OUT THE AIR-PROOF RING.
