5
EN
1.2 WARRANTY
Any defect affecting the functionality of the ap-
pliance which becomes apparent within one year
after purchase will be repaired by free repair or re-
placement provided the appliance has been used
and maintained in accordance with the instructions
and has not been abused or misused in any way.
Your statutory rights are not affected. If the appli-
ance is claimed under warranty, state where and
when it was purchased and include proof of pur-
chase (e.g. receipt).
In line with our policy of continuous product devel-
opment we reserve the right to change the product,
packaging and documentation specifi cations with-
out notice.
1.3 DISCARDING & ENVIRONMENT
At the end of the life of the appliance, please dispose
of the appliance according to the regulations and
guidelines applicable at the time.
Throw packing materials like plastic and boxes in the
appropriate containers.
2. INTRODUCTION
This advanced, reliable food-processing appliance
is intended for kneading all types of dough, beating
eggs, preparing creams, mayonnaise etc.
The mixer is equipped with a powerful motor (1/2 hp)
and a gear drive. The gears and the worm gear are
made of hardened steel. The appliance operates at
3 speeds and is equipped with accessories for pro-
cessing different kinds of food. The accessories are
made of aluminium alloy conforming to the hygienic
standards. This model is equipped with a stainless
steel safety guard as standard. Proper use and ma-
intenance of the appliance will ensure long life and
best performance.
3. INSTALLATION
UNPACKING
After unpacking, check the appliance for transport
damage. In case of damage, keep the packaging
and immediately contact the deliverer. Before in-
stallation confi rm that the power supply is in ac-
cordance with the parameters on the nameplate,
which can be found on the back, at the bottom.
POSITIONING
Place the appliance in its designed location. The
kitchen top should be on a fi rm, fl at surface. There
should be enough space around the mixer to freely
operate the appliance and install and remove the
mixing bowl.
The holes in the base are intended for permanent
mounting of the appliance, though under normal
conditions it is not necessary. Models standing on
the fl oor must be levelled by putting washers under
the feet.
CONNECTING TO THE MAINS
(mixers with power cord)
THE POWER CORD SUPPLIED WITH THE APPLI-
ANCE IS EQUIPPED WITH A THREE-PRONG PLUG
WITH GROUNDING. THE APPLIANCE SHOULD BE
CONNECTED TO A PROPERLY GROUNDED OUT-
LET. IF THE OUTLET IS NOT PROPERLY GROUND-
ED, CONTACT AN ELECTRICIAN.
