background image

Model 5314A

General Information

I-13. This instrument has a two-part serial number. The first four digits and the letter comprise
the serial number prefix. The last five digits form the sequential suffix that is unique to each
instrument. The contents of this manual apply directly to instruments having the same serial
number prefix(es)  as listed under SERIAL PREFIX on the title page.

1-14.

An instrument manufactured after the printing of this manual may have a serial prefix that

is not listed on the title page. This unlisted serial prefix indicates that the instrument is different
from those documented 

in this manual. 

The manual for this instrument is supplied with a yellow

Manual Changes supplement which contains change information that documents the
differences.

l-15. DESCRIPTION

l-16. 

The HP 5314A is a 100 MHz/100 ns Universal Counter. It features a seven-digit, seven-

segment LED display with overflow indication, seven function performance, and full input signal
conditioning. There are two options available 

for the 

HP 5314A. They are a Temperature

Compensated Crystal. Oscillator (TCXO, Option 001) and a battery pack for portable operation
(Option 002).

I-17. The seven functions are: Frequency, Single-Shot Period, Period Average, Time Interval,
Totalize, Ratio, and Self Check. This is accomplished by a single LSI integrated circuit. The input
signal is AC coupled and can be conditioned as follows: slope selection, trigger level, and
attenuation.

l-18. OPTIONS

I-19. The following is a list of options available 

for the 

HP 5314A 

Universal Counter:

NOTE

full description of the options is given in Table 

7-7, 

Specifi-

cations. For more information concerning the options for the 

HP

5314A,

 contact your local HP Sales and Service Office. 

list of HP

Sales and Service offices is provided 

at the end of this manual.

Option Description

001 

High Stability Time Base (TCXO)

002 Battery with built-in charger

NOTE

One of the following options 

must 

be included with each

order.

Option Description

115 Line operating voltage factory set at 115V nominal (86V to 127V) ac
230 Line operating voltage factory set at 230V nominal 

(19OV

 to 

250V) 

ac

For field installation of Options 001 and 002, refer to paragraph 

2-14, 

Installation of Options 001

and 002.

1-3

Содержание 5314A


















Отзывы: