STBY NORM
RATIO A/B
MHz
lOOMHr-MAX FREQ
1 Hz 10Hr 10Hz - R E S O L U T I O N
N=
SEP
NOTE
See Table 7-7 for specifications on all input signals concern-
ing bandwidth, accuracy, and amplitude. See paragraph
3-11
for time interval arming characteristics.
1.
Set line switch
the ON position.
2. Set COM A/SEP switch
to SEP position.
3. Press PER A/T.I.
switch
bottom function of switch
IN. Press the blue shift key @(IN position). This selects the
4. Connect the start time-interval signal to the INPUT A jack.
Connect the stop time-
interval signal to the INPUT B jack
5. Set SLOPE switches
and
ATTN switch
,
and
LEVEL A and B controls
and
to desired positions; see Table 7-7, Specifications,
for details.
6. Press resolution switch
(N=l)
IN.
This places the
HP 5314A
into single-shot mode.
All
time interval measurements made with the
HP 5314A
should be single-shot.
