Quick Start Guide REX 100 3G | LTE
11
Open the properties of your LAN connection in order to set the PC network card to
the IP address range and the subnet of the router.
Windows¹ XP:
Start -> Settings -> Control Panel -> Network Connections
Windows¹ 7:
Start -> Control panel -> Network and sharing center -> Change adapter settings
Note:
For your own security, you must change the login data after setting up your
router. To change them, go to the configuration menu on the myREX24 portal.
Open the Properties dialog box for the network connection that you want to use in
order to establish a connection to your REX 100 unit.
To change your computer's IP address, select "Internet Protocol (TCP/IP)" and click
on the "Properties" button.
Your IP address must fall within the “192.168.0.x” address range. The subnet mask
must match the subnet mask used by the REX 100 unit (default: 255.255.255.0).
Note:
Make sure that there are no address space conflicts with any other network ports
(do not assign the same IP address more than once). If there are, you will not be able to
communicate with your REX 100 unit properly.
When your PC network card has accepted the new settings, start a browser (Firefox,
Chrome, Opera) and enter the IP address of the router in the address line (URL) as
follows: http://192.168.0.100.
Now enter the following default login data to successfully log in to the REX 100 unit:
User name:
helmholz
Password:
router
The Internet connection path of the REX 100 is now defined uniquely at the "First
Start" website.