Quick Start Guide REX 100 3G | LTE
7
All REX 100 routers come with a LAN-side IP address of 192.168.0.100/24 as a
default. Modify the IP address and the subnet mask in keeping with the specifications
from the machinery network.
If you want to connect additional TCP/IP components to the REX 100 LAN interface
for remote servicing purposes, this IP address will also be the default gateway for the
connected devices (see page 16).
Open the “Internet” tab without clicking "Save".
Under "Connect to the server", select the actions with which this device should con
-
nect to your myREX24 account.
In the case of "Modem settings", all information concerning the access point (Access
Point Name) of the card provider must be provided and the SIM PIN entered.
You have now configured the basic settings and can click on "Save" to proceed to
transfer the configuration to the REX 100 unit using one of the options available in
the menu (see chapter 4, page 8).
In the event that the dialog for "Submit to Device" appears automatically, you can
cancel this dialog and call it up later when needed.
Note:
The myREX24 portal’s online help provides information on the function of the
advanced settings.
