Helmer Scientific i.Series
®
and Horizon Series
™
Refrigerator - Upright
Operation Manual
360372/B
5
Avoiding Injury
Review safety instructions before installing, using, or maintaining the equipment.
♦
Do not open multiple, loaded drawers at the same time.
♦
Do not move a unit whose load exceeds 900 lbs / 408 kg (single-door units) or 1350 lbs / 612 kg (double-door units).
♦
Before moving unit, ensure casters are unlocked and free of debris.
♦
Never physically restrict any moving component.
♦
Avoid removing electrical service panels and access panels unless so instructed.
♦
Use manufacturer supplied power cords only.
CAUTION
Decontaminate parts prior to sending for service or repair. Contact Helmer or your distributor for decontamination
instructions and a Return Authorization Number.
1.2 General Recommendations
Intended Use
Helmer refrigerators are intended for the storage of blood products and other medical and scientific products.
General Use
Allow refrigerator to come to room temperature before switching power on.
During initial startup, high temperature alarm may sound while refrigerator reaches operating temperature.
CAUTION
Do not remove the cover from the condensate evaporator tray.
Initial Loading
Allow the refrigerator to reach room temperature before powering on. Allow chamber temperature to stabilize at the setpoint before
storing product.
Product Loading Guidelines
When loading your refrigerator, take care to observe the following guidelines:
♦
Never load refrigerators beyond capacity.
♦
Always store items within shelves, drawers or baskets.
♦ Temperature uniformity is maintained by air circulation, which could be impeded if unit is overfilled, particularly at the top or
back. Ensure proper clearance is provided below the fan.
Note
Products stacked against back wall may obstruct air flow and affect performance of unit.
