Hellenbrand PM6 IC Storm 10, Руководство пользователя

Страница: 15 / 16

15
MODEL PM6 IC Storm 10 PM6 IC Storm 12 PM6 IC Storm 13
Backwash # 1 : Seconds 0:10
0:10 0:10
Draw DN # 1 : Minutes 8
12 12
*Water Usage (Gallons) sequence # 1
6.5
9.8 10.2
BACKWASH # 2 : MINUTES 12 12 12
RINSE # 2 : MINUTES 6 6 6
DRAW DN # 2 : MINUTES 8 12 12
*Water Usage (Gallons) sequence # 2 100 142 187
Maximum Service Flow Rate
4.0 6.0 7.0
Media, Cubic Feet
1 1.6 1.9
Mineral Tank Dimension
10x54 12x52 13x54
Drain Line Flow Control- GPM
5.3 7.5 10
Injector
Dk. Green Dk. Green Dk. Green
Max. Iron Concentration
6.0 6.0 6.0
Max. Hydrogen Sulfide Concentration
5.0 5.0 5.0
Max. Manganese Concentration
1.0 1.0 1.0
* Based upon 50 psi water pressure
require different application parameters.
Note: Manual regeneration follow sequence # 2
800591
Revised 8/12/2015
FACTORY PRESET MINUTES
** Do not use Storm filter on chlorinated water supplies.
***For levels higher than the maxium concentrations listed, contact manufacturer. Local water conditions may
PROMATE 6.0 IC STORM w/AIR REGEN SPECIFICATIONS
PROMATE 6 IC STORM WITH AIR REGEN SPECIFICATIONS
This unit is not intended to aid in the mitigation of microorganisms and is not duly registered as a pesti-
cidal device.
The Storm ozone filter must not be used on bacteriologically unsafe water supplies, such as those with
with positive Coliform or E Coli bacteria tests.