12
DRAIN LINE - 3/4”
Systems are shipped without 3/4” nut for drain elbow (polytube instal-
lation only) and 5/8” polytube insert (polytube installation only).
Option: 101618 – 3/4" Drain Elbow with Silencer Vent.
1
101414
Elbow Locking Clip
1
2
101871
Polytube Insert, 5/8”
Optional
3
102131
Nut, 3/4” Drain Elbow
Optional
4-5
101619
Drain Elbow 3/4” Male Asy-No Vent
1
5
102153
O-Ring 019
1
6
102406
DLFC Retainer Assy.
1
7
101591
DLFC 5.3 gpm for 3/4”
1
101595
DLFC 7.5 gpm for 3/4”
101598
DLFC 9.0 gpm for 3/4”
101561
DLFC 10.0 gpm for 3/4”
One DLFC must be used if 3/4 fitting is used
QTY.
ITEM NO. ORDER NO.
DESCRIPTION
Figure 12
WATER METER AND METER PLUG
1
102141
Nut 1” QC
1
2-4
102051*
Meter Assy.
1
3
102687
Turbine Assy.
1
4
102165
O-ring 215
1
5
102321
Meter Plug Assy.**
1
QTY.
ITEM NO. ORDER NO.
DESCRIPTION
*Order number 102051 includes 102687 and 102165, which are item
numbers 3 & 4.
**Only used if metering is not to be done (time clock units)
The nuts and caps are designed to be unscrewed or tightened by hand or
with the special plastic wrench. If necessary a pliers can be used to un-
screw the nut or cap. Do not use a pipe wrench to tighten or loosen nuts or
caps. Do not place screwdriver in slots on caps and/or tap with a hammer.
Figure 13
