82 / 179
The reproduction, distribution and utilization of this document as well as the communication of its contents to others without
express authorization is prohibited. Offenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of patent, utility model or design.
21.04.2020
Version 1.18.0
Installation
APS-90, APS-180 and APS-90-Outdoor-PoE
Basic configuration slaves
Automatic configuration
Examples for controlled path
Configuring the slaves
Configure a slave device as slaves.
Scan for Master device.
List of all master devices is shown.
Select the master device.
The status of the connection changes to
working
.
Repeat for all other slaves
The automatic configuration determines the positions and arrangement of the devices in
relation to each other.
The automatic configuration has 2 modes:
Random Motion
Preferred mode. A great number of people are
walking through the area. This variant can take place
during normal operation, but it takes longer. The
time depends on the number of people.
Controlled Path
A few people walk on defined paths through the
area. This variant is faster, but it needs an empty
area. The walking people have to stay 2 s or more in
the overlapping areas of the devices. The path
depends on the array
(
Examples for controlled path on page 82).
Select the master device.
The status of the slave devices has changed to
unconfigured
.
Start Automatic Configuration.
When the configuration is finished the status of the slaves changes to
configured
.
Configure the counting lines and monitored zones.
Start in one direction, turn around and repeat till the status of the slave devices is config-
ured. Stay 2 s or longer in the overlapping areas (O).
Fig. 64: Straight line
1.
2.
3.
4.
1.
2.
3.