HELLA Aglaia Advanced People Sensor, Руководство по установке и настройке

Страница: 134 / 179

134 / 179 The reproduction, distribution and utilization of this document as well as the communication of its contents to others without
express authorization is prohibited. Offenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of patent, utility model or design. 21.04.2020
Version 1.18.0
Configuration
APS-90, APS-180 and APS-90-Outdoor-PoE
6.12.3 LED Configuration
The status LED is switched off after start-up. With the LED Configuration the status LED
can be activate for some events.
Fig. 138: LED Configuration
■ To display the operation of the device activate Working (Fig. 138 /1). The LED lights up
continuously green after start-up.
■ To display a fill level >0 in a monitored zone activate Fill Level (Fig. 138 /2). The LED
lights up continuously yellow if the fill level in a zone is greater than 0.
■ To display a count event activate Count Events (Fig. 138 /3). The LED lights up blue for
1 s if a person is counted.
■ To go back to the last saved settings click the Reset button (Fig. 138 /4).
■ To save all the settings in the device click the Save button (Fig. 138 /5).
6.12.4 HMI Login
Here you can change the passwords for the two login modes.
Fig. 139: Changing Passwords
■ Enter the new password for Read-Only access (Fig. 139 /4) twice.
■ Confirm the modifications with the Save button (Fig. 139 /3).
■ Enter the new password for Full access (Fig. 139 /1) twice.
■ Confirm the modifications with the Save button (Fig. 139 /2).