VARIO-PERGOLA
INSTALLATION INSTRUCTIONS
Helioscreen Australia Pty Ltd
Page 8
Art.-Nr.: 930059 © by
WO&WO
Literal mistakes and technical changes excepted
Valid from February 2010
Page 8
InstallatIon InstructIons
Pergoline
2.8. mounting railS anD PoStS
Profile edge
•
If necessary, adjust the height of the posts to the
situation on site. For this purpose, shorten the post
profile on the side opposite the pivot.
•
Demount the cover of the guiding rail.
•
Insert the pivoting bearing with the clamping plates in
the guiding rail. Ensure that the acute side of the post
profile points forward. If required, slightly fix the pivot.
•
Insert the post profile with the pivoting bearing into the
base plate.
•
Re-install the cover of the guiding rail.
Art.-Nr.: 930059 © by
WO&WO
Literal mistakes and technical changes excepted
Valid from February 2010
Page 8
InstallatIon InstructIons
Pergoline
2.8. mounting railS anD PoStS
Profile edge
•
If necessary, adjust the height of the posts to the
situation on site. For this purpose, shorten the post
profile on the side opposite the pivot.
•
Demount the cover of the guiding rail.
•
Insert the pivoting bearing with the clamping plates in
the guiding rail. Ensure that the acute side of the post
profile points forward. If required, slightly fix the pivot.
•
Insert the post profile with the pivoting bearing into the
base plate.
•
Re-install the cover of the guiding rail.
2.7. MOUNTING RAILS AND POSTS
• If necessary, adjust the height of the posts to the situation
on site. For this purpose, shorten the post profile on the side
opposite the pivot.
• Demount the cover of the guiding rail.
• Insert the pivoting bearing with the clamping plates in the
guiding rail. Ensure that the acute side of the post profile
points forward. If required, slightly fix the pivot.
• Insert the post profile with the pivoting bearing into the base
plate.
• Re-install the cover of the guiding rail.
