Heinner HWM-H7012SE+++, Руководство пользователя

Страница: 28 / 69

www.heinner.com 7Kg, 220-240V~50Hz, 1200rpm
27
Important: Ensure that the water has cooled before draining the appliance.
1. Stop the appliance and unplug it.
2. Depending on the model, remove the plinth by holding it tightly on both sides, pushing
it downward and tilting it to the front. Or, push down on the tabs provided on both the
sides and remove it.
3. Place a container beneath it.
4. Open the filter but do not remove it completely. Slowly
turn the filter counterclockwise until the water begins to drain out.
5. Wait until all the water has drained.
6. Now unscrew the filter completely and remove it.
7. Clean the filter and the filter chamber.
8. Check that the pump rotor moves freely.
9. Re-insert the filter and screw it in clockwise as far as it will go.
10. Reinstall the plinth.
11. Plug in the appliance once again.
12. Select a program and start it.
Water supply hose
Check the supply hose regularly for brittleness and cracks and replace it if necessary, using
a new hose of the same type.
Mesh filter for water connection
Check and clean regularly.
For washing machines with an inlet hose as shown on picture "D "
1. Close the tap and loosen the inlet hose on the tap.
2. Clean the internal mesh filter and screw the water inlet hose back onto the tap.
3. Now unscrew the inlet hose on the rear of the washing machine.
4. Pull off the mesh filter from the washing machine connection with universal pliers and
clean it.
5. Refit the mesh filter and screw the inlet hose on again.
6. Turn on the tap and ensure that the connections are completely watertight.