Heinner HWM-H7012SE+++, Руководство пользователя

Страница: 25 / 69

www.heinner.com 7Kg, 220-240V~50Hz, 1200rpm
24
3. DELAY END
Delay End function allows to run the machine at the consumers’ convenience , for example,
at night when electricity is cheaper.
Only under the standby mode, this button is valid for selecting the reservation time.
• After the reservation function is selected, the time will increase 1h when each time
the reservation button is pressed. Before reservation, if the program time does not satisfy
the integral multiple of 1h, it shall be completed by pressing the reservation key for the
first time, and then the time increases 1h when each time the reservation button is
pressed. If the reservation is selected, before the program runs, the current reservation can
be canceled by turning the button to select other programs.
• The delay time must be longer than the wash program length as the delay time is the
time program will finish. For example: if the selected program time is 02:28, the delay time
selected must be between 03:00 and 24:00.
• When the reservation process is operated, the icon of ‘reservation time’ will be on.
When the reservation process is finished, the icon of ‘reservation time’ will be off, while
the icon of the ‘remaining time’ will be on.
4. TO CANCEL THE PROGRAM OR RESELECT THE OPTIONS
Rotate the program to “Off” for 3 seconds to turn off the machine. Select the new program
and options.
Press “Start / Pause” button to turn o n the machine without adding any extra detergent.
5. PROGRAME END
The washing machine shows “End”at the end of the program, when the door is unlocked. If
the knob is turned to “Off”, the power will be cut off. If there is no butto n or knob
operation within 2 minutes, the program will automatically power off .
6. RELOAD IN PROCESS
If you want to reload clothes in the process of washing, please pr ess “ Start/Pause ” button.
• If the door can be opened in the process, the door lock indicator will flash. Until
door lock indicator turns off, you can open the door to load clothes.
•
If the door lock indicator doesn ’ t flash, it indicates that current temperature is over
50
℃
or you have passed the time for reloading in the process, namely no clothes allowed
to load into the machine.
7. DOOR LOCK
After the program starts the Door Lock icon will light up and the door will be locked.
After completing program, door lock unlocks automatically. During pause, if door opening
condition can be met halfway, the door lock will unlock and its indicator light will go out.
When door lock indicator light flashes, door shall not be opened forcibly so as to avoid
personal injury.