12
3. Quick Cooling mode
Click the
“Mode”
button to enter the quick cooling mode. Icon lights up, the quick
refrigerating mode will start after locking the control panel.
4. Quick Freezing mode
Click the
“Mode”
button to enter the quick freezing mode. The icon lights up, and the
quick freezing mode will start after locking the control panel.
5. Temperature setting of refrigerating chamber
Click temperature adjusting button of the refrigerating chamber “REF. TEMP.”
. The
refrigerating compartment temperature will blink. Then click the
button “REF. TEMP.”
again to set the temperature and you will hear one beep. The adjustment range is
between 2°C and 8°C. Every time you click the button, the temperature will be changed
by 1°C. After adjusting, the digital screen will keep blinking for 5 seconds. New
temperature setting will take effect after locking the control panel.
6. Temperature setting of freezing chamber
Click temperature adjusting button of the freezing chamber “FRZ. TEMP.”
. The freezer
compartment temperature will blink. Then click the
“FRZ. TEMP.”
button again to set the
temperature, and you will hear one beep. The adjustment range is between -16°C and
-24°C. Every time you click the button, the temperature will be changed by 1°C. After
adjusting, the digital screen will keep blinking for 5 seconds. The new temperature setting
will take effect after locking the control panel.
7. Storage upon power failure
In case of power failure, the settings will be stored. After the power supply has been
restored, the appliance will operate according to the settings made before the power
failure.
8. Opening warning and alarm control
When you open the door of the appliance, you will hear a beep. If the door is not closed
in two minutes, the buzzer will sound once every minute until the door is closed. Press
any button to stop the buzzer alarm.
9. Error code
The following warnings appearing on the display indicate corresponding faults of the
refrigerator. Though the refrigerator may still have cold storage function with the
following faults, the user shall contact a maintenance specialist for maintenance, so as to
ensure optimized operation of the appliance.
