E
UNINSTALL, FORWARD & STORE
Uninstall
•
Switch off the magnetic stirrer.
•
Take the vessel off the heating plate.
•
Pull the 5-pin plug out of the socket on the back of the magnetic stirrer.
•
Take the EKT 30001 and the sensor out of their brackets.
•
Slide the brackets off the holding rod.
•
Unscrew the holding rod and remove from the housing of the magnetic stirrer.
•
Screw the black cap (1) (Figure cpt. 1.1) back in place on the top of the magnetic stirrer.
Forward & Store
1. We recommend to store the item and its components in its original box, or a similar
container that offers adequate protection against damage in transit. Tape the box se-
curely.
2. Store the item in a dry place.
Caution
Do not jolt or shake the item during transport.
DISPOSAL
For disposal, please comply with your local or national regulations.
Split by metal, plastic, etc.
Packing material to be treated as described above (material split).
TROUBLESHOOTING
Won’t heat:
– EKT 3001 not connected
– EKT 3001 broken (sensor broken)
– thermal circuit breaker in hot plate dropped (allow hot plate to cool off)
26
