E
3.5. Control
Status
Display
If the desired value is greater than the actual value, the heat-
ing is switched on. The letter “h“ (symbol for heating) is then
displayed in the fourth position from the right. If the FUZZY
logic comes into operation and switches the heating off before
the desired temperature has been reached, the “h“ symbol will
disappear.
Modern magnetic stirrers have their own system for controlling the surface temperature of
the heating plate. This internal control system always has priority.
3.6. Max
Value
press
The maximum temperature reached since the EKT 3001 was
switched on is displayed.
press
The stored MAX value is deleted.
press
The MAX value display is terminated.
If the MAX key is not pressed within 10 seconds, the appliance returns automatically to the
actual value display.
24
