34613 Rev F
8
01-03
NOVUS SERIES INSTALLATION INSTRUCTIONS
2. REAR VENTING
Remove the back cover plate, outer cover plate and inner cover plate by removing the screws. Place the 5 inner
collar in the appliance with the screws removed from the cover plates. Attach the 8 outer collar to the appliance top
using the screws removed. Make sure that the gaskets for the inner and outer collars seal tightly. Place the 12 top
cover plate with an 8 hole over the outer collar and secure with screws removed. See Figure 6. Place the top cover
plate with insulation and without the 8 hole on the top of the appliance and secure with screws provided in the parts
bag.
Figure 6
WARNING!
If not sealed, a fire hazard will be created and the
appliance will not operate properly.
WARNING!
The opening on the top of the appliance must
be sealed with an insulated cover.
When top venting, use the plate with an
8 opening and insulation. Install with
the insulation down.
When rear venting, close the unused
top opening with the solid cover with
the insulation. Install it with the
insulation down.
