01-03
7
34613 Rev F
NOVUS SERIES INSTALLATION INSTRUCTIONS
E. VENTING
1. REMOVAL OF VENT CONNECTORS
This appliance may be vented either off the rear or off the top of the appliance. Depending on your specific installation,
a vent cover must be removed from either the top or rear of the appliance and the inner and outer collars attached.
The appliance is shipped with the following vent components on the top of the appliance. To remove the vent
components from the appliance remove the two screws located in the corners. Remove the top cover plate with
insulation, back flue cover plate, top cover plate with insulation, outer collar w/gasket, and inner collar w/gasket.
See Figure 5.
THE FOLLOWING VENTING COMPONENTS ARE SHIPPED ATTACHED TO THE TOP OF THE APPLIANCE:
Figure 5
Venting Components (In order of disassembly)
