Heath Consultants RMLD-FR Скачать руководство пользователя страница 4

Страница: 4 / 27

Operator’s Manual

RMLD-FR

Doc No. 16086 Rev A, RMLD-FR Operator Manual

This is the safety alert
symbol. It is used to alert
you to potential physical

injury hazards. Obey all safety
messages that follow this symbol
to avoid possible injury or death.

DANGER indicates a hazardous

situation which, if not avoided, will

result in death or serious injury.

WARNING indicates a hazardous

situation which, if not avoided, could

result in death or serious injury.

CAUTION indicates a hazardous

situation which if not avoided, could

result in minor or moderate injury.

NOTICE indicates practices not
related to physical injury.

SAFETY INSTRUCTIONS indicates

specific safety-related instructions

or procedures.

Read this manual before using the RMLD-FR instrument and accessories.

Users must read, understand and follow the instructions for operation

and maintenance. Failure to do so can result in serious injury.

Safety Warnings & Definitions

DANGER: Do not turn on or use

inside a hazardous environment.

DANGER: Do not connect USB in a

hazardous environment.

DANGER: Do not swap batteries

while in a hazardous environment.

DANGER: To reduce the risk of
ignition of a flammable or explo

sive atmosphere, batteries must be

recharged only in a location known
to be non-hazardous.

WARNING: Read and understand

this manual fully before use.

WARNING: Follow the manual in

structions and testing methods.

WARNING: The visible

green Spotter laser is a
Class 2 (II) laser product.
Do not stare into beam
or view
directly with optical in-
struments.

WARNING: Avoid direct eye expo

sure to the laser and do not point in
the direction of others. Visible and
Invisible Lasers are deployed by this
instrument.

CAUTION: Use of controls or

adjustments or performance of pro-

cedures other than those specified

herein may result in hazardous laser

radiation exposure.

CAUTION: No attempt should be

made to repair the instrument.
Should the instrument not work

properly, or indicate a fault or warning,

refer to the troubleshooting section
of this manual.

Do not dispose of this product
in the unsorted municipal waste
stream. Dispose of this product
according to local regulations.

DANGER

WARNING

CAUTION

DANGER

WARNING

CAUTION

NOTICE

SAFETY

INSTRUCTIONS

Содержание RMLD-FR




























Результаты поиска

Содержание RMLD-FR

Отзывы:

Похожие инструкции для RMLD-FR

Бренды по названию

Популярные бренды

Heath Consultants RMLD-FR, Руководство оператора

Результаты поиска

Содержание RMLD-FR

Отзывы:

Похожие инструкции для RMLD-FR

Бренды по названию

Популярные бренды