Heath Consultants RMLD-FR Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 27

background image

Operator’s Manual

26

RMLD-FR

Doc No. 16086 Rev A, RMLD-FR Operator Manual

© 2021 Heath Consultants Incorporated. All rights reserved.

Maintenance

Warranty and Repair

Contact Information

In order to maintain the RMLD-FR in good working condition,

the following maintenance should be performed as indicated:

Maintenance Item

Frequency

Clean outer surfaces with damp rag

As needed

Clean instrument window with damp Kim-

Wipe™ or equivalent non-abrasive lens tissue

As needed to prevent dust or water stain

build up

Self Test

Daily to ensure the instrument is functioning

properly

Recharge battery pack

Recharge to full capacity after each use

Replace battery pack

As needed

When storing a battery pack for one month

or more leave a storage capacity

As needed

Instruments and products manufac-
tured by Heath Consultants Incorpo-
rated are warranted to be free from
defects in material and workman-
ship for one (1) year from the date
of shipment.

Furthermore, the warranty on

authorized repairs in the Houston
Factory Service Center (FSC) and
other regions is ninety (90) days
materials and thirty (30) days labor.

This repair warranty does not extend

any other applicable warranties.

Warranty covers only failures
due to defects in materials or
workmanship which occur during
normal use. It does not cover failure
due to damage which occurs in

shipment, unless due to improper

packing, or failures which result from
accident, misuse, abuse, neglect,
mishandling, misapplication,

alteration, modification, or service

by anyone other than a Heath
warranty repair location.

Batteries and damage from battery

leakage and all expendable items
such as filters and tubing are ex

-

cluded from this warranty.

Heath’s responsibility is expressly

limited to repair or replacement of

any defective part, provided the

product is returned to an autho-

rized warranty repair location,
shipped prepaid, and adequately

insured. Return shipping charges
and insurance will be paid by

Heath warranty expense.

We do not assume liability for

indirect or consequential damage

or loss of any nature in connection
with the use of any Heath product.

There are no other warranties ex

-

pressed, implied, or written except

as listed above.

Heath warrants only that the parts
manufactured by it will be as spec-

ified and free of defects. Heath

makes no other warranties or rep-

resentations of any kind whatsoever,
express or implied, and any and all

implied warranties including any
warranty of merchantability and

fitness for a particular purpose or

use are hereby disclaimed.

Houston Factory Service Center

9030 Monroe Road

Houston, TX 77061

Phone: 713.844.1300

Fax:

713.844.1384

www.heathus.com

CAUTION: Only a qualified

RMLD-FR repair technician should
attempt repairs/adjustments.

CAUTION: Make no attempt to

repair the instrument. There are no
user serviceable components within
the RMLD-FR.

CAUTION

«
...
24
25
26
27
»

Содержание RMLD-FR




























Отзывы:

Нет отзывов

Похожие инструкции для RMLD-FR

Бренд: Waldbeck Страницы: 124

PROTECTION PRO-78SE

Бренд: Whistler Страницы: 9

Бренд: Kathrein Страницы: 8

Бренд: IMR Страницы: 21

Бренд: Xtralis Страницы: 24

Бренд: ALZA Страницы: 76

Бренд: Cabletech Страницы: 44

Бренд: Redline Страницы: 4

Бренд: Tecno Control Страницы: 12

Бренд: Barska Страницы: 6

Бренд: Whites Страницы: 16

Бренд: Jaycar Electronics Страницы: 12

Бренд: Uniden Страницы: 28

Бренд: Uniden Страницы: 2

Бренд: Jct Страницы: 30

Бренд: Oldham Страницы: 36

Бренд: Hanwei Страницы: 12

Бренд: Whites Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды