Heartland PASADENA PAVILION 10x12, Инструкция по сборке

Страница: 26 / 34

24
ROOF PANELS
6"
(15,2 cm)
6"
(15,2 cm)
12"
(30,5 cm)
PARTS REQUIRED:
x2
x176
2" (5,1 cm)
Keep spacing between the center of the rafters at the lower edge of the panel and
secure with one 2" nail into each rafter
(Fig. E) .
Move to the top of the panel and keep spacing between the center of the rafters. Secure with
one 2" nail into each rafter
(Fig. E) .
Nail the roof panel using 2" nails 6" apart on edges and 12" apart inside panel.
Attach 47-7/8 x 48" roof panel ush to rst panel,
ush at peak of corner brace (Fig. F, G) .
4
5
Attach lower 23-7/8 x 96" roof panel ush
to top panels.
Note the panels seams are offset from
the rst panels installed.
Attach lower 23-7/8 x 48" roof panel
ush to top and lower panel as
shown.
Nail roof panels using 2” nails 6”
apart on edges and 12” apart inside
panel.
NOTE: Panels will overhang rafter
approximately 1-5/8" (4,1 cm).
Repeat Steps 1-5 on opposite side to
complete roof panel installation.
NOTE : Measurements from outside of rafters
Fig. F
Fig. G
Fig. E
2" Nails
Flush
Flush
Flush
Flush
22-3/8"
(56,8 cm)
22-3/8"
(56,8 cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
5/8 x 47-7/8 x 48"
(1,6 x 121,6 x 121,9 cm)
48"
(121,9 cm)
48"
(121,9 cm)
96"
(243,8 cm)
12"
(30,5 cm)
5/8 x 23-7/8 x 48"
(1,6 x 60,6 x 121,9 cm)
x2
5/8 x 23-7/8 x 96"
(1,6 x 60,6 x 243,8 cm)
x2
3/4"
(1,9 cm)
3/4"
(1,9 cm)
Top of panel Á ush to
peak of center brace