Heartland PASADENA PAVILION 10x12, Инструкция по сборке

Страница: 25 / 34

23
ROOF PANELS
PARTS REQUIRED:
x4
2" (5,1 cm)
x1
2
3
BEGIN
¸
1
5/8 x 48 x 96"
(1,6 x 121,9 x 243,8 cm)
Move to the opposite end. Using the long
edge of the panel as a lever move the
panel side-to-side until the top of panel is
ush to the peak of center brace
(Fig. C)
NOTE: Panels will overhang rafter
approximately 1-5/8" (4,1 cm) (Fig. D) .
Secure panel with 2" nail in the center
brace
(Fig. C) and bottom corner.
You must square the roof by attaching one panel rst. You will use the panels’ long
edge as a lever to bring your roof into square. Commonly known as “racking”.
Roof panels may cause serious injury until securely fastened.
Attach the 48 x 96" panel with the stained side
down with a 3/4" measurement on the rafter
(Fig A) and the panel ush at the peak of
center brace (Fig. B) .
Secure panel with two 2" nails in
the corners.
Fig. C
Fig. D
Two
Nails
3/4"
(1,9 cm)
Fig. A
Flush
at peak
Top of panel Á ush to
peak of center brace
Fig. B
48"
(121,9 cm)
End Rafter
Approximately
Roof Panel
1-5/8"
(4,1 cm)