Heartland PASADENA PAVILION 10x12, Инструкция по сборке, Страница: 17 / 34

15
Using pre-drilled holes in Header as a guide, pre-drill 1/4" x 2" DEEP pilot
holes into the Post Assemblies. Install fasteners as shown
(Fig. A) .
Repeat Steps 3-5 to attach Back Header
Remove temporary braces.
FRONT HEADER ATTACHMENT
PARTS REQUIRED:
FINISH
6
5
4
3
Place Front Header onto top of Post Faces, as shown, so the edges are ush
with the Side Headers and Posts (Fig. A) .
Place Front Header between the two Side Header and Post Assemblies.
All posts must be vertical, and all corners square.
Flush
Flush
3/8" Flat Washer
3/8" Lock Washer
3/8" x 4 1/2" Lag Bolt (11,4 cm)
x8
x8
x8
1/4" (0,6 cm)
Drill Bit
Fig. A
Flat Washer
Lock Washer
4-1/2" Lag Bolt
HINT: Place a protective
material under rafter end.