Hearth & Home Technologies • CK-30 Cabinet Kit Installation Manual • 4126-900 Rev A • 07/22
26
16. Install the adapter gasket by setting on top of the
adapter weldment assembly and lining up the 4 holes
in the gasket with the 4 screw holes in the weldment
assembly. See Figure 6.16.
Figure 6.16
17. Install the top adapter assembly by setting on top of the
adapter gasket and attaching with (4) #8 x ¾” screws
provided. See Figure 6.17.
Figure 6.17
18. Install the shield on top of the insert by placing tabs from
the shield into the open slots on top of the insert outer
wrap. See Figure 6.18.
Shield
Figure 6.18
19. Install the switch by snapping into the slot in the cabinet
upper back. See Figure 6.19.
Switch
Figure 6.19
Figure 6.15
Tab location
Gasket
