To ensure a safe and reliable testing procedure, place this instrument on a flat platform,
and reserve areas of at least 30cm wide
around the four sides of it, so as to make
sure proper ventilation and heat
dissipation.
Do not place any object (e.g.
paper, plastic film) at the air inlet to
prevent it from being absorbed in and
thereby permanent damage to the fan or
cooler and damage to the instrument
resulted from overheating of module
component due to poor ventilation.
Do not place any object at any of the air outlets to prevent overheating and
thereby permanent damage to the instrument resulted from poor ventilation.
Do not place any inflammable, explosive or heat-sensitive material near any
air outlet to prevent property damage or potential accident.
