Construction & Function
The lid is operated with a sliding guide to a
range as customized by the user. As shown in
the figure at the right side, you switch the knob
to the point UNLOCK and slide the lid
backwards to load the test tube into the
instrument, and then close the lid by sliding it
forwards and switch the knob to a proper
position to run the program for testing.
The handle provided on the instrument is intended for push/pull. Do not lift up or press
down the handler with force to prevent damage to the lid structure.
When the knob is switched to the point
UNLOCK, the lid can be slide back and
forth for loading/unloading of test tube.
After loading the test tube, close the lid
and rotate the knob clockwise to a proper
position and run the program for testing. It
is recommended to align mark on the
knob with the point LOCK.
Do not slide lid component forwards/backwards when the mark aligns with LOCK to
prevent damage to the lid.
