HBM FS42, Руководство пользователя, Страница: 50 / 76

Graphical User Interface
50
A4250-5.0 HBM: public
FS42
The maximum number of sensors that can be plotted
is 16. Sensor order of appearance and plot color is
defined on the Configuration tab (
see section “Sensor",
page 59 ).
Saving Data
The first action to perform before starting an acquisition
is defining sensors. This procedure is explained on
sec­
tion 6.2.4 “Configuration”, page 53 .
The Run/Stop button ( see Fig. 6.1 on section 6.2.1
“General and Management Controls”, page 46 ) will start
the acquisition process.
While the acquisition is running, the Run/Stop button
changes into its stop status (
Fig. 6.5 ).
Fig. 6.5
Data can be saved by pressing the Save button (num­
ber
3 in Fig. 6.2 ). A popup window will ask for the dataset
name. Saved data consists on a table containing the
timestamp for each measurement and corresponding
values for the active sensors. Other relevant information
relative to active sensors and interrogator configuration is
also saved.
Important
Saving data is impossible when the available database
space is lower than 5%.