manualshive.com logo in svg

HBM FS42, Руководство пользователя, Страница: 21 / 76

Поделиться
Скачать
HBM FS42 Скачать руководство пользователя страница 21

Operation

FS42

A4250-5.0

  

HBM: public

21

The replaceable battery pack has two independent bat­
teries. To avoid lifetime reduction of the batteries this
device manages charge-discharge cycles, as result of
this process some charge cycles will not reach the maxi­
mum charge level of 100%. The estimated time to fully
charge the battery pack is about 4 hours.

Important

It is advisable to fully recharge and remove the battery
pack before periods of inactivity longer than 4 weeks, see
chapter 4.5.1 “Removing the Battery Pack”.

4.5.1

Removing the Battery Pack

Changing batteries is a simple process that must be per­
formed following the procedure here described, since
irreversible damage can be caused due to incorrect use.

Important

Take the necessary precautions to avoid Electro Static
Discharge (ESD).

To change the batteries proceed as follows:

1. Shut down the interrogator and wait until the power

LED is off.

2. Unplug the power supply cable if connected to the

interrogator.

3. Unscrew Csk M4x8 screws, number 

1

 

in 

Fig. 4.3

.

Содержание FS42













































































Отзывы:

Нет отзывов