HBM FS42, Руководство пользователя, Страница: 26 / 76

Operation
26
A4250-5.0 HBM: public
FS42
4.6 Switching ON
Pressing the “ON/OFF" button ( see in Fig. 4.1 on
page 17 ) will start the engine. The interrogator software
will be automatically launched.
Once the interrogator is turned on both fans ( see in
Fig. 4.1 on page 17 ) will start working.
To connect fiber Bragg grating based sensors to the Por­
table BraggMETER FC/APC or SC/APC connectors must
be used (
see in Fig. 4.1 on page 17 ). Attention should be
paid to the cleaning of the connector. A dirty connector
can compromise the measurement and will degrade the
interrogator. It is advisable to frequently clean the con­
nectors using appropriate tools.
4.7 Switching OFF
To switch off the interrogator proceed in one of the fol­
lowing ways:
1. While running the iLog software:
- Press the Exit button ( see Fig. 4.9 ). If for the active
configuration the settings are set to “shut down on
exit", the interrogator will shut down directly. If not,
the software is active and steps described in 2
should be performed.
Refer to section 6
“iLog Software”, on page 45, for further details.