HBM Machines 55019HBM, Инструкция по эксплуатации

Страница: 16 / 40

16
MAINTENANCE SCHEDULE
The maintenance operations described below can be performed by the user. You can also ask a qualified technician to perform these maintenance works.
Every 8 hours
or daily
Every 25 hours After 3 months
or 50 hours
After 6 months
or 100 hours
For storage If necessary
Engine oil Check the oil level X
Change oil X X X
Air filter Check X*
Clean X*
Spark plug Clean or adjust X
Replace X X
Fuel tank Check the fuel level X
Drain X X
Carburettor Drain X
Spark arrester Check / clean X
Battery Shutdown X
* Clean / replace more often in dusty conditions or with intensive use.
PROBLEMS AND SOLUTIONS
Problem Cause Solution
Machine does not start. Battery is not charged. Replace the battery.
The multi switch is set to “OFF” Rotate the Multi Switch to “ON”.
No gasoline. Fill the fuel tank.
Stale gasoline or water in gasoline. Replace the gasoline.
Oil level is low. The machine shuts down when the oil level is low. Top up the oil level.
Fuel switch is set to “OFF”. Turn the fuel switch to “ON”.
Spark plug defective, dirty or incorrectly
spaced. Adjust or replace the spark plug.
Engine stored without draining gasoline. Drain the fuel. Refuel the engine with new gasoline.
The air filter is dirty. Clean or replace the air filter.
The motor has no power. The air filter is dirty. Clean or replace the air filter.
Engine stored without draining gasoline. Drain the fuel. Refuel the engine with new gasoline.
AC reset button not working. Output indicator is “OFF”, and overload
indicator is “ON”. Check AC load. Stop and restart the engine. Check the cooling air intake. Stop
and restart the engine.
AC circuit protection has tripped. Check the AC load and reset the AC circuit protector.
GFCI system is activated. Reset the RCD.
The device that is connected is defective. Try another device.