HB-CL2
Cleaning Unit
Operation
48
O8305-EN 2022-01
Manual input of agent properties
Fig. 17: Agent properties
If the cleaning agent does not appear on the list of
cleaning agent
parameters, proceed as follows:
1.
Set the
cleaning agent
parameter on the „RM_“ value.
2.
Set the
nom.cons. cleaning
and
Density cleaning agent
according to the agent used.
If the neutralisation agent does not appear on the list of
neutralisation agent
parameters, proceed as follows:
3.
Set the
neutralisation agent
parameter on the „NM_“ value.
4.
Set the
Density neutralisation agent
,
pH limit value neutr.
low
and
pH limit value neutr. high
according to the agents used.
If the pre-preservation agent does not appear on the list of
Prepreservation agents
parameters, proceed as follows:
5.
Set the
Pre-preservation agent
on the „VKM_“ value.
6.
Set the
nom.cons. pre-preservation
and
Density pre-
preservation agent
according to the agent used.
If the preservation agent does not appear on the list of
preservation
agent
parameters, proceed as follows:
7.
Set the
preservation agent
parameter on the „KM_“ value.
8.
Set the
nom.cons. preservation
and
Density preservation
agent
according to the agent used.
NOTICE!
If you encounter problems with the determination
of the parameter, please contact the nearest
HB-Therm representative.
9.
Apply properties with
Check input
.
Change agent
Fig. 18: Change agent
Proceed as follows in order to subsequently change the agent:
1.
Display the menu page
Settings \ Cleaning
.
2.
Set the desired parameter to the agent used resp. set the
properties of the agent manually.
