Figure 10: Meter Control Window of Standard 4 Gas.
3.1 Controlling the Meter
To operate the HazSim, use the arrows to change the readings on the meter. Single arrow
will increase/decrease by an increment value and the double arrow by a jump increment
value. This is customizable when editing/creating a meter. (See section 4 Advanced
Features.) ‘Norm’ returns the individual sensor to it’s normal reading and “Norm all’ returns
all sensors to normal.
To change meters simply select the black meter icon in the top of the meter control screen
and a previous list of meters will show. Select a new meter from the list and the HazSim will
change to the selected meter.
Note to instructors: Take care to change the meter appropriately and not to confuse the
student during an evolution.
8
