12x10 & 12x12 eCONO Apex Shelter
FITTING INSTRUCTIONS
Fix roof purlins to top of support rail, each purlin sits above the indicated pencil mark- fix from below using 100mm screws- also install
additional screws from side or top of purlin through into the top rail of the gable end to stop any twisting.
The 2 purlins which fit into the metal hangers front & back are slightly smaller in depth to the standard purlins (these will have one sawn cut
face on the 45mm face)
DO NOT USE A STANDARD DEPTH PURLIN IN THE HANGERS the correct purlin will sit flush with the top of the gable
end top plate while a standard purlin will sit above the gable end top plate and is an incorrect fit- must be flush!
The 2 purlins that fit one
either side of the ridgeline have an add-on to help to fit the ridge cap. The add-ons must sit facing the ridgeline.
Fix the purlins into the hangers using the 40mm galvanised nails provided.
Fit the front purlin centre support- screw through face of
front purlin into centre support using 2 x No.5 x 100mm
screws. Screw either side of the centre support into the front
wall timber plate- dovetail screws in.
